Will this drain my starting battery?

No! We recommend installing a battery isolator to protect your starting battery. The AC runs on your house batteries.

How long does it run on batteries?

With a 400 Ah battery bank, expect 6-10 hours of runtime depending on ambient temperature.

Can I install this myself?

Yes! If you're comfortable with basic electrical work and power tools, DIY installation takes 4-6 hours.

Does this work with solar panels?

Absolutely! We recommend 400-800W of solar panels for optimal off-grid performance.

B-COOL PAC portable air conditioner for trucks RVs vans and off-grid use — 110V AC 5200 BTU UL certified R290 32.6 lbs

B-COOL PAC | Portable Air Conditioner for Trucks, RVs, Vans & Off-Grid Use

Name: B-COOL PAC | Portable Air Conditioner for Trucks, RVs, Vans & Off-Grid Use
Brand: B-COOL AIR CONDITIONERS
SKU: B-COOL-PAC-110V
Price: 595.00 CAD
Availability: InStock

$595.00

The B-COOL PAC is a self-contained portable air conditioner built for truckers, overlanders, van lifers, and anyone who needs real cooling without a permanent installation. No roof cutting. No drilling. No refrigerant work. Set it up where you need it, route the exhaust duct out a window or door gap, and it starts cooling in minutes.

Unit has a front evaporator side that blows cold air into the space, and a rear condenser side that exhausts heat out through the included duct. The unit ships with all refrigerant factory pre-charged and all pipes factory welded. Plug in, attach the duct, and go.

The B-COOL PAC drops from 30°C to 15°C in just 5 minutes. Whether you are resting in a truck cab, cooling a tent, a boat cabin, or a job-site trailer, it delivers real air conditioning wherever you need it: indoors or outdoors.

COOLING ONLY. The B-COOL PAC is a cooling-only unit. Heating is not available on this model.

Download B-COOL PAC (IOG-2) Spec Sheet

Specification	Value
Cooling Capacity	1500W
Rated Cooling Power	400 W
Voltage	110-120 V
Refrigerant	R290
Circulating Air Volume	150 m3/h
Noise Level	≤60dB
Product Dimensions	22.91 x 11.26 x 13.74 inches
Net Weight	14.8 kg

B-COOL PAC Portable Air Conditioner unit
Rear air hood
Exhaust duct — large (130mm diameter, 1m long) for hot air outlet
Air suction duct — small (100mm diameter, 1m long)
Drain pipe
Remote control
Operating manual

Installation for the B-COOL PAC is completely plug-and-play.

Connect the rear air hood to the back of the unit.
Attach the exhaust duct and air suction duct to the hood.
Route the ducts to ensure heat is exhausted properly from the hot air outlet.
Connect the unit to a 110-120 V power source.

The B-COOL PAC works like a miniaturized truck AC packed into a single portable enclosure with two sides:

Front cold side: Air enters through the front inlet, passes through the internal filter and over the evaporator. The refrigerant absorbs heat and cold air exits through the front outlet into your space.

Rear hot side: The condenser absorbs heat from the refrigerant and exhausts it out through the duct, which you route outside through a window gap, door gap, or vent.

The exhaust duct must always be routed outside while the unit is running. Leaving the duct unvented will heat the space instead of cooling it.

Control Panel & Remote

Control Panel: 6 Buttons

Button 1 - Power: On / off. Short press also turns display lights off.
Button 2 - Mode: Short press cycles Cooling, Dehumidification, Sleep, Fan. Long press: pair the remote.
Button 3 - Up: Add temperature or time.
Button 4 - Down: Reduce temperature or time.
Button 5 - Timer: Set scheduled shutdown. Long press: reset WiFi or Bluetooth.
Button 6 - Airflow: Short press cycles through airflow levels.
Buttons 3 and 4 together: Toggle Celsius and Fahrenheit.

Remote Control

Auto-pairs on battery install
Mode cycles: Cooling, Dehumidification, Sleep, Fan
Temperature range: 16°C to 30°C
Airflow and timer functions included
To re-pair: long press Mode on remote and hold Mode on panel for 3 seconds until beep

Cooling Modes

Cooling — active compressor cooling, adjustable airflow
Dehumidification — removes moisture without aggressive cooling
Sleep — gradual temperature adjustment for overnight comfort
Fan — fan only, compressor off. Circulates air without active cooling.

Error Codes

CodeMeaningActionE0Control board to power board connection looseReconnect the cable between boardsE1Temperature sensor malfunction — sensor loose, damaged, or out of range (5°C to 100°C)Check connectionE4Condensate tank fullDrain and resealE5Low voltage protection triggeredDisconnect unit, wait 3 minutes, restart

Using on DC Power (Trucks & Off-Grid)

The B-COOL PAC runs on 110V AC. To use it from a 12V or 24V vehicle battery system, you need a compatible inverter:

Minimum inverter output required: 1,500W
Connect the inverter directly to the battery — NOT to the cigarette lighter socket
Cigarette lighter circuits are not rated for this power draw
Both 12V and 24V systems are compatible with the right inverter

Contact our sales team at sales@dcpowersales.com or 778-590-5000 for inverter recommendations compatible with the B-COOL PAC.

The B-COOL PAC is the right unit if:

You're a trucker or sleeper cab operator who needs real cooling without engine idling and without cutting the roof
You own an RV, motorhome, or camper van and want portable AC without a permanent roof installation
You camp, overland, or go off-road and need real air conditioning at a campsite, not just a fan
You have a yacht or boat cabin that needs cooling at anchor or at the dock
You run a job site trailer or portable workspace and need cooling wherever you go
You need a UL-certified portable air conditioner with real North American technical support and parts availability

The B-COOL PAC is the no-installation entry point into B-COOL cooling. No roof cut. No drilling. No refrigerant work. Just plug in, route the duct out a gap, and it's running.

Applications

Semi trucks and sleeper cabs — long haul trucks — RVs, motorhomes, camper vans, travel trailers — tents, camping, outdoor events — yachts and boats — job sites and portable workspaces — off-road vehicles and overlanding rigs — bedrooms and small rooms.

Does it need a permanent installation?
No. Place it where you need it, route the exhaust duct out a window or door gap, and it is ready. No roof cutting, no drilling, no refrigerant work required.

Does it work on 12V or 24V vehicle power?
Yes, with a 1,500W minimum output inverter connected directly to the battery — not the cigarette lighter.

Is it UL certified?
Yes. UL certified to UL60335-1 Ed.6 and UL60335-2-24 Ed.3, tested by Waltek Testing Group, January 2025.

Does it have heating?
No. The B-COOL PAC is a cooling-only unit.

What refrigerant does it use?
R290, a natural environmentally friendly refrigerant. All refrigerant is factory pre-charged and all pipes are factory welded. The unit arrives sealed and ready to run. Do not attempt to modify or recharge the system.

Does it need the exhaust duct?
Yes. The exhaust duct must be routed outside at all times. Running the unit without proper venting will heat the space instead of cooling it.

Can it ship by standard courier?
Contact us at sales@dcpowersales.com or 778-590-5000 to confirm shipping options for your location before ordering.

How fast does it cool?
The B-COOL PAC drops from 30°C to 15°C in 5 minutes.

What is the temperature control range?
16°C to 30°C (60.8°F to 86°F).

When you buy from B-COOL, you're not buying from an Amazon storefront with no support. You're buying from the team that wrote the installation manual, stocks the replacement parts, and answers the phone.

Sales & Inquiries
📧 sales@dcpowersales.com
📞 778-590-5000

Technical Support
📧 adrian@dcpowersales.com
📞 778-679-4999

Parts Available in Canada & United States. We stock all parts - compressor, control board, condenser fan assembly, evaporator, blower motor, louver motor, all hoses, hardware and more.

Every other brand lists BTU numbers. We don't, and here's why.

BTU ratings in the 12V and 24V air conditioner market are tested in controlled lab conditions and competitors go with their favourite testing company and tend to use those results that depicts them the "best". Real-world performance — inside a truck cab or RV sitting in the sun at 100°F+ — is a completely different story. The numbers you see on competitor listings are inflated, and we are not willing to publish figures that mislead the people who depend on this equipment to stay safe and productive.

Lower amp draw means longer battery runtime. For operators running on batteries overnight, during rest breaks, or in anti-idling zones, the 6RM stretches your power further than any other rooftop option in our lineup.

Compare All B-COOL Models

Model	Noise	Weight	Airflow	12V Amps	24V Amps	Special Features	Availability
5RM	68 dB	40 lbs	400 m³/h	40 – 75A	11 – 40A	Lightest rooftop, simplest install	Available to Purchase Online
X7RM	68 dB	48 lbs	400 m³/h	40 – 75A	11 – 40A	Cooling + PTC heating (4-season)	Pricing Upon Request
6RM	38 dB	60 lbs	310 m³/h	30 – 60A	8 – 33A	Quietest small rooftop, lowest amp draw, auto-swing louver	Pricing Upon Request
9RM	38 dB	77 lbs	350 m³/h	30 – 70A	8 – 38A	Capillary tube, large cab coverage	Pricing Upon Request
12RV	28 dB	77 lbs	350 m³/h	30 – 70A	8 – 38A	Quietest unit overall, RV square cut, internal filters	Pricing Upon Request
12RM Dual Fan	48 dB	99 lbs	400 m³/h	35 – 85A	10 – 45A	Dual fan, most modes, Hybrid Control Panel optional	Pricing Upon Request
YTRM	48 dB	99 lbs	460 m³/h	35 – 85A	10 – 45A	Highest airflow, yard truck built, ignition cut-off	Pricing Upon Request
FLEX ST	48 dB	53 lbs	350 m³/h	35 – 65A	10 – 35A	Flexible hose routing, split system	Available to Purchase Online
FLEX QC	48 dB	53 lbs	350 m³/h	35 – 65A	10 – 35A	Quick Connect, split system, 100A fuse included	Pricing Upon Request
WMB ST	48 dB	44 lbs	350 m³/h	35 – 65A	10 – 35A	Wall/side mount, no roof cut needed	Available to Purchase Online
WMB QC	48 dB	44 lbs	350 m³/h	35 – 65A	10 – 35A	Quick Connect, wall/side mount, 100A fuse included	Pricing Upon Request